๐Ÿ”ง Service Call JUST $79 โญ 791 Google Reviews ๐Ÿ… Red Seal Certified Technicians ๐Ÿ“ž (403) 889-6068
Services
Appliance Services โ–พ
Brands
All Brands โ–พ
Service Areas
Calgary & Area โ–พ
Blog About Contact ๐Ÿ“ž Call (403) 889-6068
Homeโ€บBlogโ€บDishwasher Repair

Dishwasher Filter Cleaning: Step-by-Step Guide and Schedule

Dishwasher filter cleaning takes minutes and fixes gritty dishes and smells. Follow our step-by-step guide, schedule and troubleshooting table.

Freedom Appliances recommends regular dishwasher filter cleaning because a clogged filter causes many of the problems homeowners report. Dishes come out gritty. A sour smell lingers after the cycle. Water pools at the bottom of the tub. In most cases the machine is fine, and the filter just needs attention. This guide shows you where the filter sits, how to clean it safely and when a deeper fault is at play.

What the Dishwasher Filter Does

Your dishwasher recirculates the same water throughout the cycle. The filter traps food scraps, seeds and grit so they do not land back on your plates. Without it, debris would clog the spray arms and damage the pump.

Most modern machines use a fine mesh filter plus a coarse screen or cup. Some older models have a self-cleaning grinder instead. Check your manual to see which type you own. The design affects how you remove and clean it.

Because it works every cycle, the filter fills quickly. A household that rinses plates lightly may need cleaning more often than one that scrapes thoroughly.

Signs You Need Dishwasher Filter Cleaning

The machine usually tells you before it fails. Look for these signals:

  • Gritty film on glasses and plates
  • Food bits left on dishes after a full cycle
  • A persistent bad smell in the tub
  • Standing water after the cycle ends
  • Louder pump noise than usual
  • Cloudy glassware that does not improve with rinse aid

If you spot several of these, check the filter first. It takes just a few minutes and needs nothing but time. If the smell remains, our article on a dishwasher that smells bad covers other sources.

Step-by-Step Dishwasher Filter Cleaning

Switch off the dishwasher and let it sit for a few minutes. Remove the bottom rack so you can reach the floor of the tub. Keep a towel and a small bowl close by.

Remove the Filter

Look for a round cylindrical filter near the spray arm or a flat filter under a cover. Twist the cylinder counter-clockwise and lift it out. Lift flat filters by the handle or tabs. Do not force any part. If it sticks, consult the manual.

Wash and Inspect

Rinse the filter under warm running water. Use a soft brush or an old toothbrush to loosen stuck grime. Avoid steel wool, which can tear fine mesh. Inspect the mesh for holes. A torn filter lets debris through and should be replaced.

Clean the Sump Area

Wipe the area where the filter sits with a damp cloth. Remove any glass fragments carefully and wear gloves. Check the drain opening for bits of label or bone. Then refit the filter and lock it into place.

Take your time during dishwasher filter cleaning, because rushing leads to cracked tabs and missed grime. A properly seated filter is vital. A loose or misaligned part can cause leaks and poor wash results.

Why Rinsing Before Loading Can Backfire

Many people rinse plates thoroughly before loading them. Modern detergents contain enzymes that need some food soil to work well. Over-rinsed dishes can leave the detergent with nothing to act on, so it may etch glassware instead.

Scrape off large scraps and bones, then load the plates. This keeps the filter cleaner and the cycle more effective. It also saves water, which is good for your household and the environment.

Cleaning Schedule and What Each Part Needs

Different parts collect different kinds of residue, so a single routine does not cover everything. Industry estimates suggest most dishwashers last around 9 to 13 years with good care. Use this table as a handy guide to keep the whole machine in good shape.

PartHow oftenWhat to do
FilterEvery 1 to 2 weeks in heavy useRemove, rinse, brush and refit
Spray arm holesMonthlyClear holes with a toothpick
Door gasketMonthlyWipe with a damp cloth
Tub interiorMonthlyRun an approved cleaner cycle
Drain hoseEvery 6 monthsCheck for kinks and leaks

If you have hard water, add rinse aid and check for scale on the tub walls. Scale from mineral-rich water can coat the tub and clog small spray holes over time.

Common Mistakes With Dishwasher Filter Cleaning

Some habits make matters worse. Running the machine without a filter is one. Another is washing it with harsh chemicals that damage plastic. Skipping a dry check on the seal when you refit the filter can also cause leaks.

Another mistake is expecting filter cleaning to solve every fault. Weak spray, a failed pump or a blocked drain hose can all create similar symptoms. If cleaning does not help, move on to the next check rather than repeating the same steps.

Natural Resources Canada offers general advice on Natural Resources Canadaโ€™s dishwasher efficiency tips, including how loading habits affect energy and water use. Scraping plates lightly rather than rinsing them fully works well for most modern machines.

When Cleaning Is Not Enough

Filter care solves a large share of wash problems, but not all of them. Think of it as the first and easiest test. If the machine behaves the same afterwards, you have learned something useful. That knowledge narrows the search for a technician and saves time during the visit.

After you finish dishwasher filter cleaning, run a short cycle and watch. If water still stands in the tub, the drain pump or hose may be blocked. Our guide on a dishwasher not draining explains the next steps.

If dishes still come out dirty, read about a dishwasher not cleaning. Spray arms, wash pumps and water inlet valves are all possible causes. A technician can test each part without guesswork.

Our dishwasher repair team in Calgary finds the cause and explains the options plainly. An honest quote is given after assessment, and no work begins until you agree.

Frequently Asked Questions

How often should I clean the dishwasher filter?
Check it every one to two weeks if you use the machine daily. Light users can stretch to monthly. Clean it sooner if you notice smells or grit.

Can I run the dishwasher without the filter?
No. Running it without the filter lets debris reach the pump and spray arms. This can cause clogs and serious damage over time. Always refit the filter before starting a cycle.

Why do my dishes smell after washing?
Trapped food in the filter and sump is the usual cause. A clean filter and a monthly cleaner cycle often solve it. Persistent smells may point to a drain problem.

Is the filter dishwasher-safe?
Many filters can be washed by hand only. Check your manual before putting it in the top rack. Hand washing is the safest approach.

What happens if I never clean the filter?
Debris builds up until water cannot circulate properly. Dishes stay dirty, smells grow and the drain pump strains. Eventually the machine may stop mid-cycle or leak.

Contact Freedom Appliances

Need help with a stubborn dishwasher? Reach our team.

  • Phone: (403) 889-6068
  • Address: 12447 17 St SW, Calgary, AB T2W 4B5
  • Hours: Mon to Fri 8:00 AM to 5:00 PM, Sat and Sun 9:00 AM to 6:00 PM, with emergency service available 7 days
Service Call
$79
Applied toward repair cost
๐Ÿ“ž Call (403) 889-6068

Need Appliance Repair
in Calgary Today?

Same day service ย โ€ขย  Red Seal certified ย โ€ขย  $79 service call

Developed by Two Trees Studio โ€“ Web Design & Development